1CH Passive TVI Balun Pair Sends Video, Power, Data & Audio

Send Video, Power & Data Or Audio - Transmit 200m Down An RJ45 Cable

• Pigtail BNC Connection
• Send DC Or AC Power
• Transmit RS485 Data
• Use with Analogue or HD-TVI, CVI, AHD
• RJ45 Socket
• Up To 200m Range
• Transmit Audio
• 2.1mm DC Connections
• Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one in fact PASSIVE baluns just have the transformers and very little else in them.
• On some PASSIVE baluns that carry video and data signals, the data “terminals” do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These
• “terminals” can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.
• The new ZENDit range of baluns have built in QUAD technology that make them compatible with both analogue and HD (TVI, CVI & AHD) video signals.
• The BAL810 pairs feature a a pigtail lead for connections. One with a  BNC plug & DC plug for connection to a camera and an RJ45 socket for a plug in connection to CAT5, the other with a BNC plug and DC socket for connection to a DVR and PSU.
• You can send power up to a 100m at maximum current of 100mA as well as the video with this balun pair simply connect one balun to the camera's video and power and the other to a DVR and PSU
• 1 Year Warranty

• No of Video Inputs 1
• Video Input Connection BNC Plug (Male)
• CAT V Output Connection RJ45 Socket
• No of Video Outputs 1
• Max TX Distance 200m
• No of Audio Inputs 1
• Audio Input Connection Bare Wires
• No of Audio Outputs 1
• Audio Input Connection Bare Wires
• No of Data Inputs 1
• Data Input Connection Bare Wires
• No of Data Outputs 1
• Data Output Connection Bare Wires
• Video Bandwidth 60 MHz
• Power Passive (Not Required)
• Pack Size 2
• Dimensions 210 x 28 x 20mm

SaveSave