Fully loaded with all of the D-TECT 2 features, the D-TECT 3 additionally incorporates an adjustable microwave sensor offering exceptional resistance to false alarms. Both the D-TECT 2 and D-TECT 3 allow for the detection range to be programmed, thus avoiding boundary overspill.
No other movement detectors are more versatile or offer such a wide range of features to enhance the detection of threats and significantly reduce the incidence of false alarms.
The D-TECT range sets new standards of performance and control, is easier to install and yet is highly cost-effective.
| TECHNICAL SPECIFICATION: DTECT3 |
| Range |
Programmable up to 35m |
| Coverage |
10°-70° detection angle, 30m x 30m coverage max |
| Adjustment |
180° pan + 90° tilt |
| Mounting Height |
Variable – optimum 3m |
| Fresnel Lens |
28 zones for each Pyro pair, which can be masked
with the curtain sliders and special masking tape (supplied) |
| Outputs |
2 Volt free and 2 neg. switched plus one common
tamper (front and rear switches) |
| Indicators |
3 x LED's. Green: microwave, red: both PIR's,
blue: alarm output (all three sensors) |
| Power input |
9 to 15 VDC |
| Current |
9mA (12V nominal) |
| Pulse count |
1 - 3 |
| Walk Test |
Output test mode with LED indication |
| Operating Temperature |
-20°C to + 55°C. Conformally coated electronics
for increased stability |
| Housing |
High impact zinc alloy |
| Protection Rating |
IP55 |
