Genie Simple IP Mini Dome Camera

No Networking experience is required with Genie’s Simple IP cameras. Power the camera up & plug it into a router with an Ethernet cable. It automatically identifies a suitable IP address. Install the GenieView software (from the CD Rom supplied). Installation takes seconds! Connect Camera Using a Unique ID/Password

The ID card supplied contains the camera’s ID number and a changeable password. This is required to initially connect and locate a camera from the internet (utilises Internet Explorer only). If accessing through the GenieView software, the camera is automatically detected. Now, any user or installer with no IP / Networking experience can install these simple and easy to set up IP cameras!

• 1/3” Sony Super HAD CCD
• Standard Resolution (420 TVL)
• Bodied Camera, Bullet Camera, Mini Dome Camera and Vandal Dome Camera Options
• Auto White Balance
• Auto Gain Control
• Auto Selection (PAL or NTSC)
• 3-Axis Mount

• Self-Networking
• MPEG-4 Compression
• Connect to Cameras from Anywhere
• Free Client Software
• 4 to 20 Simultaneous Users
• Adjustable Frame Rate
• Image Quality Settings (VGA / QVGA / QQVGA)
• Automatically Adjusts Image Quality by Network Bandwidth
• Bandwidth Settings
• Adjustable Bandwidth from 64 Kb to 1.5Mb
• Manual and Motion Detection Recording
• Multi Protocols
• Web Managed Password Protection
• Supports Microsoft Windows XP or Above
• Minimum Hardware Requirements: Pentium 4 CPU 1.0 GHz or Higher
• ID Card Supplied with each Camera