Genie Water Resistant Keypad / Reader / Controller

Dual-Relay Access Control Keypad with EM & HID 125 KHz Built-In Card Reader, Housed in a Strong, Sturdy & Vandal Resistant, Zinc Alloy Electroplated Case, Waterproof as Electronics are Fully Potted, Conforms to IP67. Suitable for Mounting Indoor, Outdoor or in Harsh Environments.

• Water Resistant, Conforms to IP67
• Strong Zinc Alloy Electroplated Anti-Vandal Case
• Programmable One Relay Output
• 1,500 Users & 10 Groups for Duress PIN/Card
• Wiegand 26/34 Input & Output
• Card, Fob & PIN Functions
• Reads Mifare 13.56MHz Card
• PIN Length 4 ~ 6 Digits
• Pulse Mode or Toggle Mode Options
• Can Operate as a Reader or Controller
• Adjustable Door Output Time, Alarm Time & Door Open Time
• Fast Operating Speed, <0.1s With 1500 Users
• Lock Output Current Short Circuit Protection
• Manager Cards for Individually Adding or Deleting Card Users
• Low Power Consumption (25mA)
• Blue Back Lit Buttons
• Built In Light Dependent Resistor (LDR) for Anti Tamper
• Built In Buzzer
• Red, Yellow & Green LEDs Display the Working Status
• DC12 ~ 24V or AC12 ~ 18V
• PLEASE NOTE
• For Wiegand Mode, the keypad can be used for EITHER Card OR Pin – NOT both. Wiegand data is sent on a first come first send basis. If you show the Card and then the Pin, the keypad will transmit the Card ID immediately and then the Pin number as a Wiegand ID straight after that. For this reason Card & Pin are not relevant in Wiegand mode but only useful in Standalone mode. In Wiegand mode, PIN Number = Wiegand ID that your 3rd party controller will see.