Antihum 1 Channel Passive Balun With Groundloop Isolator

1ch Passive Video Balun With A Built In Ground Loop Isolator

• Pigtail BNC Connections
• Up To 100m Range
• 2 In 1 Design
• Built In Ground Loop Isolator
• Transient Suppression
• Quick & Easy To Fit
• Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one. PASSIVE baluns just have the transformers and very little else in them.
• ACTIVE baluns have extra electronic circuits used to amplify the signals helping prevent losses and also filtering out unwanted noise.
• On some PASSIVE baluns that carry video and data signals, the data “terminals” do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These “terminals” can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.
• The BAL250 1ch channel passive balun has a built in ground loop isolator. It simply terminates ground loop currents in a cable and blocks the hum and interference carried in the ground loop. The BAL250 should be fitted between the camera and the input of CCTV equipment such as a DVR that it is connected to, ideally at the DVR end of the installation!
• The BAL250 feature a a pigtail connection at each end one BNC socket and the other a BNC plug.
• 1 Year Warranty

• Video Inputs 1
• Video Input Connection BNC Socket (Female)
• No of Video Outputs 1
• Video Output Connection BNC Plug (Male)
• Max TX Distance 100 Mtrs
• Power Passive (Not Required)
• Dimensions 56 x 28 x 21mm (240mm BNC Leads)

SaveSaveSaveSave