HDMI Mule TX HDMI Down CAT5 1080P

Send HDMI signals over a LAN even through switches!

• 1 TX Can Transmit to Multiple RXs
• Preconfigured for Most Networks
• IR Control Over Remote Equipment
• Compact Wall Mountable Units
• Minimal Set-up Required
• Low Voltage 5V DC (PSU Supplied)

• These HDMI Mule transmitters can send signals over a network to multiple receivers so you can view the HDMI output in multiple locations.
• Sometimes it’s convenient to locate your DVR or NVR in one part of a building but you want the monitor in a different location or even multiple monitors in multiple locations.  As modern CCTV equipment uses HDMI outputs to drive monitors you need a solution that can send the HDMI signals to different locations. As most buildings have a CAT5/6 network you can piggy back on this and distribute the HDMI over the network using our HDMI mules
• The mules send HDMI data in one direction and IR control signals in the other direction so you can watch and control your DVR/NVR from remote locations over a network. Ideal for multiple CCTV viewing in varied locations.
• Tip: You can buy HDMI over CAT5 boxes that are simply "Baluns" these basic devices will not allow you to send HDMI over a LAN or LAN switches. If you want the full flexibility of HDMI over a true network use a mule!
• HDMI Mule units are available in pairs (Code: HDMI200). Alternatively receivers can be purchased individually (Code: HDMI190).

• No of Inputs 1
• Input Connection HDMI
• No of Outputs 1
• Output Connection CAT5
• Video Output 1080p @ 60Hz
• Power 5V DC, 620mA
• PSU Supplied
• Cable Length Max 120m
• Cable Type CAT5 or better
• Dimensions 92mm x 79mm x 20mm