HDMI Mule RX HDMI Down CAT5 1080P

Send HDMI signals over a LAN even through switches!

• 1 TX Can Transmit to Multiple RXs.
• Preconfigured for Most Networks
• IR Control Over Remote Equipment
• Compact Wall Mountable Units
• Minimal Set-up Required
• Low Voltage 5V DC (PSU Suppled)

• You can use a number of these HDMI Mule receivers and a single transmitter to view a HDMI output in multiple locations.
• Sometimes it’s convenient to locate your DVR or NVR in one part of a building but you want the monitor in a different location or even multiple monitors in multiple locations.  As modern CCTV equipment uses HDMI outputs to drive monitors you need a solution that can send the HDMI signals to different locations. As most buildings have a CAT5/6 network you can piggy back on this and distribute the HDMI over the network using our HDMI mules.
• The mules send HDMI data in one direction and IR control signals in the other direction. Multiple receivers can be added to the network and all access just one transmitter meaning your DVR/NVR can be viewed and controlled by multiple members in varying locations.
• Tip: You can buy HDMI over CAT5 boxes that are simply "Baluns" these basic devices will not allow you to send HDMI over a LAN or LAN switches. If you want the full flexibility of HDMI over a true network use a mule!
• HDMI Mule units are available in pairs (Code: HDMI200). Alternatively transmitters can be purchased individually (Code: HDMI190).

• No of Inputs 1
• Input Connection CAT5
• No of Outputs 1
• Output Connection HDMI
• Video Output 1080p @ 60Hz
• Power 5V DC, 620mA
• PSU Supplied
• Cable Length Max 120m
• Cable Type CAT5 or better
• Dimensions 92mm x 79mm x 20mm